Firelock Nxt S 768 Reset. Victaulic 768n Firelock Nxt Manual These instructions involve pipe that is properly prepared and grooved in accordance with current Victaulic specifications • The minimum air pressure for a Series 768 FireLock NXT Dry Valve installed with or without a Series 746-LPA Dry Accelerator shall be 13 psi/90 kPa/0.9 Bar
Victaulic Series 768 FireLock NXT™ Dry Valve Installation Instructions from www.youtube.com
• The minimum air pressure for a Series 768 FireLock NXT Dry Valve installed with or without a Series 746-LPA Dry Accelerator shall be 13 psi/90 kPa/0.9 Bar Failure to follow these instructions can cause product failure, resulting.
Victaulic Series 768 FireLock NXT™ Dry Valve Installation Instructions
5-Year Rebuild Kit control unit pdf manual download • The minimum air pressure for a Series 768 FireLock NXT Dry Valve installed with or without a Series 746-LPA Dry Accelerator shall be 13 psi/90 kPa/0.9 Bar • Depressurize and drain the piping system before attempting to install, remove, adjust, or maintain any Victaulic piping products
Victaulic Series 745 FireLock™ Valves FirePac for FireLock NXT™ Valves. FireLock NXT™ Series 768N Dry System Check Valve User Manuals, Guides and Specifications for your Victaulic FireLock NXT 768 Series Control Unit
Victaulic FireLock NXT™ Series 768 Dry Valve Placing System into. Firelock nxt actuated valve with preaction trim (46 pages) Control Unit Victaulic FireLock NXT. I-768N / Series 768N FireLock NXT ™ Dry Valve / Installation, Maintenance, and Testing Manual INTERNAL VALVE COMPONENTS - SECTION VIEW AND EXPLODED VIEW DRAWINGS Clapper Latch Diaphragm Assembly Clapper Seal Seat Exaggerated for Clarity Valve is shown in the "set" position The 1½-inch/48.3-mm and 2-inch/60.3-mm valve sizes contain washers under the heads of the cover plate bolts.